How to make a garden path and to decorate the facade of the building with the help of the Lugansk stone?

One of the most popular types of natural stone, which carried out the paving and decoration of buildings is the so-called Lugansk stone. Lugansk stone is a banded quartz Sandstone soft shades of grey and green. The physical properties of the Lugansk stone are suitable for exterior cladding of facades of buildings, and the scope of the material has a wide range. Now we take a closer look, what is the Lugansk stone, but I'll also give you the technology to create walkways and facade with his own hands with the help of this material.
  • Article
  • Video

Advantages and scope of the Lugansk stone

Луганский камень в ландшафтном дизайне

Lugansk stone in landscape design

As mentioned earlier, Lugansk stone is a quartz Sandstone, so, of course, the material has high strength properties. In addition Lugansk stone has the following advantages:

  • High frost resistance
  • Practically does not absorb moisture
  • The durability of the material
  • Easy care construction, faced with the Lugansk stone (it is enough to wash the wall or the path with water from the hose)
  • Well sawn, so we can track, easy fitting stones to each other
  • Has a nice shade
  • Goes well with other materials for landscaping (brick, tree etc.)
  • Has a wide range of applications, as a designer, and in the construction business

In addition to the above advantages of the Lugansk stone, it should be noted, what material has the widest scope, all the components of which it is impossible to list.

Lugansk stone in landscape design

Most often the Lugansk stone is used for the following types of work:

  • Paving garden paths
  • Facing of facades of buildings
  • The interior walls of the room
  • From big stone plates make an unusual countertops
  • When the art of painting stone create an unusual mural

As you can see, advantages and scope of the Lugansk stone are quite powerful, so if you decide to use natural stone for decorative purposes, suggest you to opt for this quartz Sandstone!

Garden path from the Lugansk stone with their hands

Садовая дорожка из луганского камня

Garden path from the Lugansk stone

That would quickly make an unusual and at the same time, durable garden path with their hands can use this material, as the Lugansk stone. Thanks to its lamellar ragged form, garden path will have an unusual appearance, and in harmony with the other elements of landscape design of adjoining territory.

Technology for creating garden paths from the Lugansk stone with their hands is quite simple, requires no special skills of building business, and enlist the aid of special equipment and the wizard.

To create the tracks we will need the following tools and materials:

  • Bulgarian
  • Lugansk stone
  • Rope and wooden pegs
  • Building level
  • Shovel
  • Sand and gravel
  • Trowel
  • Rubber hammer (mallet)

First, prepare the terrain, where you will pass the garden path from the Lugansk stone. To do this, align the earth's surface (compare Bugry, the soil from which is thrown into the pit), remove garden debris and mark out the boundaries of the garden path with the help of ropes and pegs.

The pegs need to drive in the corners of the garden path, and every 2-3 meters on flat areas. Once the boundaries of the track are spaced, over the entire area future tracks removable layer of soil to a depth of about 25 cm.

The bottom carefully stamped, fill the bed of gravel (about 10 cm), and it is another, sandy, pillow (too 10 cm). This sand-gravel cushion will serve as the drainage under the track, providing a flow of water. Drain the pillow must be filled with water and thoroughly compacted, what would all the voids are clogged bulk material.

Next, go to the paving of the garden walkways of the Lugansk stone. It is best to first set the border, which will hold the stone from the spread, and will give the garden path a more luxurious look. To install border you need to dig a small trench around the perimeter (the width of the curb), then again, to create a drainage cushion and put the curb on cement-sand mortar.

Now select the flat tiles quartz Sandstone (Lugansk stone) and begin to pave from one end of the track to another. Paving is butt joint, that there were no gaps. In order, what would the stone denser sat in the sand podstegivaet his mallet. Be sure to use the building level, watching the evenness of the track. If its uneven stone newlast in the bounds of the track, it can be easy to saw grinder, creating the appropriate form.

At the end of the paving required to pour the remaining sand on the track, and paritative it, that would posability all gaps and seams. Next, sweep away the remaining sand with a broom and enjoy a stroll along the garden path from the Lugansk stone, hand made!

Finished the facade, built with the help of the Lugansk stone

That would brightly adorn the facade of the garden buildings (houses, garage either summer kitchen) you can use the finish of the Lugansk stone. The technology of finishing is quite simple and does not require professional equipment and a great amount of money.

Отделываем фасад постройки с помощью луганского камня

Finished the facade, built with the help of the Lugansk stone

All we need, this is a small knowledge and the following tools:

  • Clay tiles from the Lugansk stone (the surface should be smooth)
  • Mixture for gluing natural stones and decorative tiles
  • Trowel
  • Measuring tool (building level, lace, roulette)
  • A container for mixing glue (it is better to use a 10 litre bucket)
  • A power drill with a mixer

First step is to prepare the wall for finishing. To do this, bring down the remaining tiles (if there is one), the spatula scrapes the paint and bring down pieces of the solution, which are.

Further, using the building level and cord, spaced horizontal lines, on which to lay tile.

Then fall asleep in a bucket of the adhesive mixture and pour a little clean water. Using a drill with a mixer, bring down the ingredients until smooth, necessary adding water. The end result of the mixture should resemble thick glue.

Now take a tile and trowel overlapping glue, then laid the material on the wall. Laying tile must be done top-down from one wall edge to another. Tile has to be tightly joined to each other, if you want to make seams, they should be minimal.

Here, actually, and the whole technology of finishing of the Lugansk stone wall. As you can see, paving paths and finishing of walls is not a complex technology, therefore, it is realistic to do everything with your hands.

We wish you success and many creative ideas in creating small architectural forms and other garden accessories with your own hands!

Lugansk stone in landscape design
Liked the article? Easily share your bookmark with your friends, social. networks: